2 x h 0.8m Warm White Connect+ Icicle Lights, 140 LEDs, transparent cable, connectable

This power supply includes the following products:

• Connect+ Transformer 28V, 12W, up to 800 LEDs (SKU LP79387)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are supplied separately and must be connected to each other before connecting the lights. With this power supply it is possible to connect multiple Connect+ icicle lights up to a maximum of 12 meters in length.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is switched off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows managing the same functions within a range of 4 meters.

The Transformer is equipped with a Schuko plug for connection to the household power supply. The Controller, on the other hand, is equipped with a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the connector for connection to the decoration).

Combined power supply SKU (Transformer and Controller): LPCP800B

This power supply includes the following products:

• Connect+ Power Supply 28V, 24W, up to 1600 LEDs (SKU LP79394)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 24 x 0.8 m high.

The Controller has two integrated buttons that allow:

• Selection of one of the 7 lighting effects or steady light;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows the same functions within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP1600B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79448)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 36 x 0.8 m high.

To ensure optimal brightness across all icicles, due to the low voltage, the maximum length must not exceed 25 linear meters per series of icicles.

To reach the 36 meters total, it is necessary to use the multi-connectors available among the accessories, connecting multiple icicles of a maximum length of 25 meters each.

For example, using a 2-output multi-connector, it is possible to connect one row of 25-meter icicles and another row of 11 meters, reaching a total length of 36 meters.

The Controller has two integrated buttons that allow:

• Selection of one of the 7 lighting effects or steady light;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows the same functions within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP2400W

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79448)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 61 meters in total length.

To ensure optimal brightness across all icicles, due to the low voltage, the maximum length must not exceed 25 linear meters per series of icicles.

To reach the 61 meters total, it is necessary to use the multi-connectors available among the accessories, connecting multiple icicles of a maximum length of 25 meters each.

For example, using a 4-output multi-connector, it is possible to connect two rows of 25-meter icicles and another row of 11 meters, reaching a total length of 61 meters.

The Controller has two integrated buttons that allow:

• Selecting one of the 7 lighting effects or steady light;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows managing the same functions within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP4000W

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79448)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 90 meters in total length.

To ensure optimal brightness across all icicles, due to the low voltage, the maximum length must not exceed 25 linear meters per series of icicles.

To reach the 90 meters total, it is necessary to use the multi-connectors available among the accessories, connecting multiple icicles of a maximum length of 25 meters each.

For example, using a 4-output multi-connector, it is possible to connect three rows of 25-meter icicles and another row of 15 meters, reaching a total length of 90 meters.

The Controller has two integrated buttons that allow:

• Selecting one of the 7 light programs or fixed light;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows managing the same functions within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP6000W

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, steady light only, up to 6000 LEDs (SKU LP79462)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 36 x 0.8 m high.

To ensure optimal brightness across all icicles, due to the low voltage, the maximum length must not exceed 25 linear meters per series of icicles.

To reach the 36 meters total, it is necessary to use the multi-connectors available among the accessories, connecting multiple icicles of a maximum length of 25 meters each.

For example, using a 2-output multi-connector, it is possible to connect one row of 25-meter icicles and another row of 11 meters, reaching a total length of 36 meters.

The Controller has two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

This power supply does not allow selecting lighting effects: the lights will remain always on. However, the controller is essential to ensure all LEDs in the icicle light turn on correctly.

The Memory function allows the system to retain the selected brightness even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows managing the same functions (still without lighting effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP2400B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A fixed light only, up to 6000 LEDs (SKU LP79462)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 61 meters in total length.

To ensure optimal brightness across all icicles, due to the low voltage, the maximum length must not exceed 25 linear meters per series of icicles.

To reach the 61 meters total, it is necessary to use the multi-connectors available among the accessories, connecting multiple icicles of a maximum length of 25 meters each.

For example, using a 4-output multi-connector, it is possible to connect two rows of 25-meter icicles and another row of 11 meters, reaching a total length of 61 meters.

The Controller has two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow selecting lighting effects: the lights will always remain fixed. However, the controller is essential to ensure the correct activation of all LEDs in the icicle.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows managing the same functions (still without lighting effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP4000B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A fixed light only, up to 6000 LEDs (SKU LP79462)

The two products are supplied separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ icicle lights up to a maximum of 90 meters in total length.

To ensure optimal brightness across all icicles, due to the low voltage, the maximum length must not exceed 25 linear meters per series of icicles.

To reach the 90 meters total, it is necessary to use the multi-connectors available among the accessories, connecting multiple icicles of a maximum length of 25 meters each.

For example, using a 4-output multi-connector, it is possible to connect three rows of 25-meter icicles and another row of 15 meters, reaching a total length of 90 meters.

The Controller has two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow selecting light effects: the lights will always remain fixed. However, the controller is essential to ensure the correct operation of all LEDs in the icicle lights.

The Memory function allows the system to retain the selected brightness even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows managing the same functions (still without light effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connector).

Combined power supply SKU (Power Supply and Controller): LPCP6000B-S

This power supply allows you to connect multiple Connect+ Icicle Lights up to a maximum of 10 meters in length.

The battery pack is suitable for both indoor and outdoor use and works with 4 D-type batteries (Flashlight), not included.

It features an integrated button that allows you to select one of the 7 light effects, the fixed light mode, or turn off the decoration.

The following advanced functions are accessible exclusively via the remote control (sold separately):

• Brightness adjustment on 4 levels (100%, 75%, 50%, 25%);
• Setting one of two timers (6 or 8 hours).

Thanks to the Memory function, the system keeps the selected light effect even after switching off.

The battery pack is compatible with the Connect+ remote control (sold separately), which allows you to control all functions within a range of 4 meters.

The battery pack comes with a 0.3-meter power cable.

SKU: LP79486