1 x h 1m Warm White Connect+ Curtain Lights, 100 LEDs, transparent cable, connectable

This power supply includes the following products:

• Connect+ Power Supply 28V, 12W, up to 800 LEDs (SKU LP79387)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Curtain Lights up to a maximum length of 8 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains. The Controller, on the other hand, features a 4 meters power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP800B

This power supply includes the following products:

• Connect+ Power Supply 28V, 24W, up to 1600 LEDs (SKU LP79394)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are supplied separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ Curtain Lights up to a maximum of 17 x h. 1 meter.

The Controller has two integrated buttons that allow:

• Selecting one of the 7 light effects or the static light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control, sold separately, which allows you to manage the same functions within a 4 meter range.

The Power Supply is equipped with a Schuko plug for connection to the mains and has a 1.5 meter black cable. The Controller, on the other hand, has a 4 meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection connector).

SKU for the combined power supply (Power Supply and Controller): LPCP1600B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79448)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 25 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 25 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 2-output multi-connector, it is possible to connect one series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 8 x h. 1 meters, thus reaching a total length of 25 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP2400W

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 25 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 25 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 2-output multi-connector, it is possible to connect one series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 8 x h. 1 meters, thus reaching a total length of 25 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP2400B

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79448)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 42 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 42 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 4-output multi-connector, it is possible to connect two series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 8 x h. 1 meters, thus reaching a total length of 42 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP4000W

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 42 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 42 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 4-output multi-connector, it is possible to connect two series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 8 x h. 1 meters, thus reaching a total length of 42 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP4000B

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79448)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 64 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 64 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 4-output multi-connector, it is possible to connect three series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 13 x h. 1 meters, thus reaching a total length of 64 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP6000W

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 64 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 64 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 4-output multi-connector, it is possible to connect three series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 13 x h. 1 meters, thus reaching a total length of 64 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP6000B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 25 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 25 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 2-output multi-connector, it is possible to connect one series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 8 x h. 1 meters, thus reaching a total length of 25 meters.

The Controller features two integrated buttons that allow:

• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

This power supply does not allow selection of lighting effects: the lights will always remain steady. However, the controller is essential to ensure proper operation of all LEDs in the curtain lights.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions (always without light effects) within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP2400B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 42 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 42 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 4-output multi-connector, it is possible to connect two series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 8 x h. 1 meters, thus reaching a total length of 42 meters.

The Controller features two integrated buttons that allow:

• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

This power supply does not allow selection of lighting effects: the lights will always remain steady. However, the controller is essential to ensure proper operation of all LEDs in the curtain lights.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions (always without light effects) within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP4000B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ curtain lights up to a maximum of 64 x h. 1 meters.

To ensure optimal brightness along the entire curtain, due to the low voltage, it is necessary not to exceed a maximum length of 17 linear meters for each single series of curtain lights.

To reach the total 64 x h. 1 meters, it is necessary to use multi-connectors available among the accessories, connecting multiple series of curtain lights with a maximum length of 17 meters each.

For example, using a 4-output multi-connector, it is possible to connect three series of curtain lights of 17 x h. 1 meters and one series of curtain lights of 13 x h. 1 meters, thus reaching a total length of 64 meters.

The Controller features two integrated buttons that allow:

• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

This power supply does not allow selection of lighting effects: the lights will always remain steady. However, the controller is essential to ensure proper operation of all LEDs in the curtain lights.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions (always without light effects) within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains and features a 1.5-meter black cable. The Controller, on the other hand, features a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP6000B-S

This power supply allows you to connect multiple Connect+ Curtain Lights up to a maximum of 8 meters in length.

The battery pack is suitable for both indoor and outdoor use and works with 4 D-type batteries (Flashlight), not included.

It features an integrated button that allows you to select one of the 7 light effects, the fixed light mode, or turn off the decoration.

The following advanced functions are accessible exclusively via the remote control (sold separately):

• Brightness adjustment on 4 levels (100%, 75%, 50%, 25%);
• Setting one of two timers (6 or 8 hours).

Thanks to the Memory function, the system keeps the selected light effect even after switching off.

The battery pack is compatible with the Connect+ remote control (sold separately), which allows you to control all functions within a range of 4 meters.

The battery pack comes with a 0.3-meter power cable.

SKU: LP79486