Warm White Connect+ Cascading Lights, 3 strips, 300 LEDs, green cable, connectable

This power supply includes the following products:

• Connect+ Power Supply 28V, 12W, up to 800 LEDs (SKU LP79387)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 6 meters in length.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP800B

This power supply includes the following products:

• Connect+ Power Supply 28V, 24W, up to 1600 LEDs (SKU LP79394)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 15 meters in length.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP1600B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 24 meters in length.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP2400B

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 42 meters in length.

To ensure optimal brightness of all cascading lights, given the low voltage, it is necessary not to exceed the maximum length of 36 linear meters for each series of cascading lights.

To reach a total of 42 meters, it is necessary to use the multi-connectors available among the accessories, connecting multiple cascading lights with a maximum length of 36 meters each.

For example, by using a 2-output multi-connector, it is possible to connect one row of cascading lights of 36 meters, and one row of cascading lights of 6 meters, thus reaching a total length of 42 meters.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP4000B

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 63 meters in length.

To ensure optimal brightness of all cascading lights, given the low voltage, it is necessary not to exceed the maximum length of 36 linear meters for each series of cascading lights.

To reach a total of 63 meters, it is necessary to use the multi-connectors available among the accessories, connecting multiple cascading lights with a maximum length of 36 meters each.

For example, by using a 2-output multi-connector, it is possible to connect one row of cascading lights of 36 meters, and one row of cascading lights of 27 meters, thus reaching a total length of 63 meters.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP6000B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 24 meters in length.

The Controller is equipped with two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow selecting light effects: the lights will always remain steady. However, the controller is essential to ensure the correct switching on of all the LEDs of the cascading light.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities (always without light effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP2400B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 42 meters in length.

To ensure optimal brightness of all cascading lights, given the low voltage, it is necessary not to exceed the maximum length of 36 linear meters for each series of cascading lights.

To reach a total of 42 meters, it is necessary to use the multi-connectors available among the accessories, connecting multiple cascading lights with a maximum length of 36 meters each.

For example, by using a 2-output multi-connector, it is possible to connect one row of cascading lights of 36 meters, and one row of cascading lights of 6 meters, thus reaching a total length of 42 meters.

The Controller is equipped with two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow selecting light effects: the lights will always remain steady. However, the controller is essential to ensure the correct switching on of all the LEDs of the cascading light.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities (always without light effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP4000B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ cascading lights up to a maximum of 63 meters in length.

To ensure optimal brightness of all cascading lights, given the low voltage, it is necessary not to exceed the maximum length of 36 linear meters for each series of cascading lights.

To reach a total of 63 meters, it is necessary to use the multi-connectors available among the accessories, connecting multiple cascading lights with a maximum length of 36 meters each.

For example, by using a 2-output multi-connector, it is possible to connect one row of cascading lights of 36 meters, and one row of cascading lights of 27 meters, thus reaching a total length of 63 meters.

The Controller is equipped with two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow selecting light effects: the lights will always remain steady. However, the controller is essential to ensure the correct switching on of all the LEDs of the cascading light.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities (always without light effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller, instead, has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

Combined power supply SKU (Power Supply and Controller): LPCP6000B-S

This power supply allows you to connect multiple Connect+ Cascading Lights up to a maximum length of 6 meters.

The battery pack is suitable for both indoor and outdoor use and works with 4 D-type (Torch) batteries, not included.

It has an integrated button that allows you to select one of the 7 light effects, the static light mode, or to turn off the decoration.

The following advanced functions are only accessible through the remote control (sold separately):

• Brightness adjustment with 4 levels (100%, 75%, 50%, 25%);
• Setting one of the two timers (6 or 8 hours).

Thanks to the Memory function, the system retains the selected light effect even after the decoration is turned off.

The battery pack is compatible with the Connect+ remote control (sold separately), which allows you to control all functions within a range of 4 meters.

The battery pack comes with a 0.3-meter power cable.

SKU: LP79486