5m Green White Connect+ String Lights, 50 LEDs, green cable, connectable

This power supply includes the following products:

• Connect+ Power Supply 28V, 12W, up to 800 LEDs (SKU LP79387)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 80 meters.

The Controller features two integrated buttons that allow:

• Selection of one of the 7 light effects or steady light mode;
• Adjustment of one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected lighting effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (not included), which allows managing the same functions within a range of 4 meters.

The Power Supply is equipped with a Schuko plug for connection to the mains. The Controller, on the other hand, features a 4 meters power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection).

SKU of the combined power supply (Power Supply and Controller): LPCP800B

This power supply includes the following products:

• Connect+ Power Supply 28V, 24W, up to 1600 LEDs (SKU LP79394)
• Connect+ Controller 1A, up to 1600 LEDs (SKU LP79431)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 160 meters.

Given the low voltage, to ensure optimal brightness along the entire string, do not exceed the maximum length of 80 linear meters per individual string.

To reach a total of 160 meters, use the available multi-connectors by connecting multiple strings, each with a maximum length of 80 meters.

For example, by using a 2-output multi-connector, it is possible to connect 2 strings of 80 meters, reaching a total length of 160 meters.

The Controller has two integrated buttons that allow:

• Selecting one of the 7 light effects or the static light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (sold separately), which allows you to control the same functions within a 4 meters range.

The Power Supply is equipped with a Schuko plug for connection to the mains and has a 1.5 meters black cable. The Controller, on the other hand, is equipped with a 4 meters power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection connector).

SKU for the combined power supply (Power Supply and Controller): LPCP1600B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 240 meters.

To ensure optimal brightness along the entire string, given the low voltage, the maximum length of 80 linear meters per individual string should not be exceeded.

To reach a total of 240 meters, it is necessary to use the available multi-connectors among the accessories, connecting multiple strings of a maximum length of 80 meters each.

For example, using a 4-output multi-connector, you can connect 3 strings of 80 meters, reaching a total length of 240 meters of string.

The Controller is equipped with two integrated buttons that allow:

• Selecting one of the 7 light effects or the static light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is switched off.

The Controller is compatible with the Connect+ remote control (sold separately), which allows you to manage the same functions within a 4-meter range.

The Power Supply is equipped with a Schuko plug for connection to the mains and has 1.5 meters of black cable. The Controller, on the other hand, is equipped with a 4-meter power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration connection connector).

SKU for the combined power supply (Power Supply and Controller): LPCP2400B

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 400 meters.

To ensure optimal brightness along the entire string, given the low voltage, it is necessary not to exceed the maximum length of 80 linear meters per individual string.

To reach a total of 400 meters, it is necessary to use the available multi-connectors by connecting multiple strings, each with a maximum length of 80 meters.

For example, using a 6-output multi-connector, it is possible to connect 5 strings of 80 meters, reaching a total length of 400 meters.

The Controller has two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the connection connector for the decoration).

Combined power supply SKU (Power Supply and Controller): LPCP4000B

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A, up to 6000 LEDs (SKU LP79455)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum of 600 meters in length.

Given the low voltage, to ensure optimal brightness along the entire string, do not exceed the maximum length of 80 linear meters per individual string.

To reach a total of 600 meters, it is necessary to use the available multi-connectors by connecting multiple strings, each with a maximum length of 80 meters.

For example, by using a 9-output multi-connector, it is possible to connect 7 strings of 80 meters and 1 string of 40 meters, reaching a total of 600 meters of string.

The Controller has two integrated buttons that allow:

• Selecting one of the 7 light effects or the steady light mode;
• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (sold separately), which allows you to control the same functions within a 4 meters range.

The Power Supply is equipped with a Schuko plug for connection to the mains and has a 1.5 meters black cable. The Controller, on the other hand, is equipped with a 4 meters power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

SKU for the combined power supply (Power Supply and Controller): LPCP6000B

This power supply includes the following products:

• Connect+ Power Supply 28V, 36W, up to 2400 LEDs (SKU LP79400)
• Connect+ Controller 3A, steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 240 meters.

Given the low voltage, to ensure optimal brightness along the entire string, do not exceed the maximum length of 80 linear meters per individual string.

To reach a total of 240 meters, use the available multi-connectors by connecting multiple strings, each with a maximum length of 80 meters.

For example, by using a 4-output multi-connector, it is possible to connect 3 strings of 80 meters, reaching a total length of 240 meters.

The Controller has two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow for selecting light effects: the lights will remain steady. However, the controller is essential to ensure the proper activation of all the LEDs in the string.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (sold separately), which allows you to control the same functions (without light effects) within a 4 meters range.

The Power Supply is equipped with a Schuko plug for connection to the mains and has a 1.5 meters black cable. The Controller is equipped with a 4 meters power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

SKU for the combined power supply (Power Supply and Controller): LPCP2400B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 60W, up to 4000 LEDs (SKU LP79417)
• Connect+ Controller 3A, steady light only, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected together before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 400 meters.

To ensure optimal brightness along the entire string, due to the low voltage, the maximum length of 80 linear meters per individual string should not be exceeded.

To reach a total of 400 meters, multi-connectors available among the accessories should be used, connecting multiple strings, each with a maximum length of 80 meters.

For example, by using a 6-output multi-connector, it is possible to connect 5 strings of 80 meters, reaching a total length of 400 meters of string lights.

The Controller has two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activation of one of two timers (6 or 8 hours).

This power supply does not allow the selection of light effects: the lights will remain steady. However, the controller is essential for proper operation of all the LEDs in the string.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ Remote Control, available separately, which allows you to manage the same functionalities (always without light effects) within a range of 4 meters.

The Power Supply has a Schuko plug for connection to the mains and features 1.5 meters of black cable. The Controller has a power cable of 4 meters (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the connection connector for the decoration).

Combined power supply SKU (Power Supply and Controller): LPCP4000B-S

This power supply includes the following products:

• Connect+ Power Supply 28V, 90W, up to 6000 LEDs (SKU LP79424)
• Connect+ Controller 3A steady light, up to 6000 LEDs (SKU LP79462)

The two products are provided separately and must be connected to each other before connecting the lights. With this power supply, it is possible to connect multiple Connect+ String Lights up to a maximum length of 600 meters.

To ensure optimal brightness along the entire string, given the low voltage, do not exceed the maximum length of 80 linear meters per individual string.

To reach a total of 600 meters, it is necessary to use the available multi-connectors by connecting multiple strings, each with a maximum length of 80 meters.

For example, by using a 9-output multi-connector, it is possible to connect 7 strings of 80 meters and 1 string of 40 meters, reaching a total length of 600 meters of string.

The Controller has two integrated buttons that allow:

• Setting one of the 4 brightness levels (100%, 75%, 50%, 25%);
• Activating one of the two timers (6 or 8 hours).

This power supply does not allow light effects to be selected: the lights will remain steady. However, the controller is essential to ensure the correct activation of all the LEDs in the string.

The Memory function allows the system to retain the selected brightness level even after the decoration is turned off.

The Controller is compatible with the Connect+ remote control (sold separately), which allows you to manage the same functions (still without light effects) within a 4 meters range.

The Power Supply is equipped with a Schuko plug for connection to the mains and has a 1.5 meters black cable. The Controller, on the other hand, is equipped with a 4 meters power cable (0.8 meters from the connector to the Controller and 3.2 meters from the Controller to the decoration's connector).

SKU for the combined power supply (Power Supply and Controller): LPCP6000B-S

This power supply allows you to connect multiple Connect+ String Lights up to a maximum of 80 meters.

The battery pack is suitable for both indoor and outdoor use and works with 4 D-type batteries (Flashlight), not included.

It features an integrated button that allows you to select one of the 7 light effects, the fixed light mode, or turn off the decoration.

The following advanced functions are accessible exclusively via the remote control (sold separately):

• Brightness adjustment on 4 levels (100%, 75%, 50%, 25%);
• Setting one of two timers (6 or 8 hours).

Thanks to the Memory function, the system keeps the selected light effect even after switching off.

The battery pack is compatible with the Connect+ remote control (sold separately), which allows you to control all functions within a range of 4 meters.

The battery pack comes with a 0.3-meter power cable.

SKU: LP79486

This power supply allows you to connect multiple Connect+ String Lights up to a maximum length of 160 meters.

Given the low voltage, to ensure optimal brightness along the entire string do not exceed the maximum length of 80 linear meters per individual string.

To reach a total of 160 meters, it is necessary to use the available multi-connectors. These allow you to connect multiple strings, each with a maximum length of 80 meters.

For example, using a 2-output multi-connector, you can connect 2 strings of 80 meters, reaching a total length of 160 meters.

The solar panel has two buttons that allow:

• Selecting one of the 7 light effects or the static light mode;
• Turning the system on and off.

The following advanced functions are only accessible via the remote control (sold separately):

• Brightness adjustment in 4 levels (100%, 75%, 50%, 25%);
• Setting one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is switched off.

The solar panel is compatible with the Connect+ remote control (sold separately), which allows you to control all functions within a 4 meter range.

If needed, the internal 3600mAh PowerBank can be recharged by connecting the included USB cable to the mains, using a standard mobile charger (not included).

The solar panel is equipped with a 4 meters transparent power cable.

SKU: LP79493

This power supply allows you to connect multiple Connect+ String Lights up to a maximum length of 400 meters.

Given the low voltage, to ensure optimal brightness along the entire string, do not exceed the maximum length of 80 linear meters per individual string.

To reach a total of 400 meters, it is necessary to use the available multi-connectors between the accessories. These allow you to connect multiple strings, each with a maximum length of 80 meters.

For example, with a 6-output multi-connector, you can connect 5 strings of 80 meters, reaching a total length of 400 meters.

The solar panel has two buttons that allow:

• Selecting one of the 7 light effects or the static light mode;
• Turning the system on and off.

The following advanced functions are only accessible via the remote control (sold separately):

• Brightness adjustment in 4 levels (100%, 75%, 50%, 25%);
• Setting one of the two timers (6 or 8 hours).

The Memory function allows the system to retain the selected light effect even after the decoration is switched off.

The solar panel is compatible with the Connect+ remote control (sold separately), which allows you to control all functions within a 4 meter range.

If needed, the internal 10800mAh PowerBank can be recharged by connecting the included USB cable to the mains, using a standard mobile charger (not included).

The solar panel is equipped with a 4 meters transparent power cable.

SKU: LP79509